The introduction of Remote Magnetic level gauge

                                                 The introduction of Remote Magnetic level gauge

The remote Magnetic level gauge is an instrument that can display and measure the liquid level on the spot. It has the characteristics of simple structure, intuitive and clear reading, no blockage, no leakage, convenient installation, and simple maintenance. The remote magnetic flap level gauge is widely used in the measurement of liquids in open or pressure vessels in petroleum, chemical and other industries. Due to the complex working conditions on site, in order to meet the actual needs of users, we have developed different types of magnetic flap level gauges, which can achieve high sealing, leakage prevention and safety and reliability under high temperature, high pressure, high viscosity, and strong corrosive conditions. The whole process of measuring liquid level. Equipped with steam jacket, thermal insulation and anti-frost additional devices, help the instrument to survive the winter safely, even in the cold winter still stable and reliable measurement.

Remote transmission Magnetic level gauge use and maintenance:

1. During normal operation, there should be no magnetically attracted objects such as magnets or irons close to the cylinder of the level gauge, otherwise it will affect the movement of the float and cause the level of the indicator to be unreal (fake liquid), and two colors of turning columns may appear. The disorder is disorderly. At this time, a magnet can be used to guide the outside of the flip-column display so that all the flip-columns in the flip-column display are turned white, and you will find that the flip-column at a certain point in the middle of the flip-column display is in two colors, and then use the magnet to handle it. The turning pillars under the turning pillar can be restored when all turning red.

2. The medium with impurity deposits should be drained through the drain valve frequently to prevent the impurity deposits from affecting the movement of the float.

3. When the sensor is in use, there should be no magnets close to it, otherwise the signal will be disordered, and the normally open type will be restored when the magnet is removed. The bistable state may be restored after the float passes the affected switch, or it can be removed when the magnet is removed. Pay attention to the direction the magnet is removed to make it return to its normal state.

4. The housing of the main components in the sensor is made of glass to avoid impact to avoid the failure of the sensor.

Features of remote Magnetic level gauge:

1. It is suitable for the liquid level and boundary level measurement of pressure vessels, which can integrate on-site indication, remote transmission and control alarm.

2. The indication is novel, the reading is intuitive and eye-catching. The viewing angle can be changed according to the user's convenience.

3. The measurement range is large, not limited by the height of the storage tank.

4. The indicating mechanism is completely isolated from the measured medium, so it is well sealed, has high reliability, and is safe to use.

5. High temperature resistant, can use non-fading ceramic turning column.

6. Simple structure, convenient installation and low maintenance cost.

The Magnetic level gauge can achieve high sealing, leak-proof and adapt to the liquid level measurement under high pressure, high temperature and corrosive conditions. It has reliable safety and it makes up for the unclear indication of the glass plate (tube) level gauge. , The lack of fragility, is not affected by high and low temperature drastic changes, and does not require the combination of multiple sets of level gauges. The whole process of measurement has no blind spots, the display is eye-catching, the reading is intuitive, and the measurement range is large. Especially the on-site indication part, because it is not in direct contact with the liquid medium, it has more advantages for high temperature, high pressure, high viscosity, toxic and harmful, and strong corrosive media.